Contents
Table of Contents | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Excerpt | ||
---|---|---|
| ||
Access to the openIMIS Extracts page is restricted to users with the system role of Scheme Administrator (IMIS Central online) or HF Administrator (IMIS offline installations) or with a role including an access to Tools/Extracts. This page will contain all functionality for data synchronization between IMIS Central and IMIS offline installations as well as the generation of extract files for the mobile phones (Android). Depending on the type of installation, the interface will enable and disable certain functions. Pre-conditionsThe extract functionality is covering extracts for the mobile phone applications and the openIMIS ‘offline’ installations. Offline extracts are only to be generated in case a district has so called ‘off-line’ installations in areas where no Internet connectivity is available. Extracts are to be downloaded to the local PC that is initiating the creation of the extract. Standard procedures should be formulated to stipulate the time interval between Extract creations and the management of transporting and installing/transferring these extracts into the target environment: mobile phones or offline openIMIS clients. NavigationAll functionality related to openIMIS extracts can be found under the main menu |
...
Clicking on the sub menu This page opens in two different modes depending on the type of openIMIS installation: openIMIS Central (live server) or openIMIS offline (installed on local network in a health facility or an office of the scheme administration). IMIS Extracts (online mode) |
...
The Extracts Page is divided into eight sections (Image 6.23). A - Download Master Data section The Master Data section is used for generation of the data needed for off-line operation of IMIS (Policies) application run on Android platforms. The following data files can be downloaded:
B - Create Phone Extract section The Phone extract panel is used for the generation of so called SQLite database files for the mobile phone applications. Each district will have its own phone extract file that needs to be distributed to the mobile phones within the district. To generate a phone extract file, the operator has to select a region and a district from the list of available districts. In case the user is having access to its own district only, the district will be automatically selected and shown on the display. By clicking the
In case the extract is created in the background, the following dialog box appears: |
...
If the extract is not created in background the user is notified about successful creation by the following message as shown below. |
...
The extract will be downloaded to your local computer by clicking the |
Img. 220 Image 181
The extract file is called IMISDATA.DB3 and needs first to be copied (downloaded) to the local machine. After clicking the |
Img. 221 Image 182
...
The extract is now ready to be transferred/copied to the mobile phones. This process is performed manually by connecting the mobile phone to the computer with the provided USB cable. The user needs to copy, manually, the file from the local machine into the ‘IMIS’ Folder on the mobile phone. C - Offline Extract section The offline extract section is used to generate the openIMIS ‘offline’ extract files for the health facilities or offices of the scheme administration that run openIMIS offline. To generate an offline extract file, the operator has to select a region and a district from the list of available districts. In case the user is having access to its own district only, the district will be automatically selected and shown on the display. When an operator belongs to one specific district, the district box is already selected with the district of the user. To create a new extract, the operator needs to click the Three types of extracts could be generated:
|
...
|
...
Img. 223 Image 184
|
...
Img. 224 Image 185
After clicking the |
...
The message is only shown to provide some details on how much information is exported to the extract file. Depending on the |
...
After clicking OK the statistics of the full extract will be shown: |
...
We are now ready to download the extract to our computer. The combo box next to the district selector contains information on all generated extracts with the sequence number and date. (e.g. Sequence 000007 – Date 06-09-2012). If the extract selector does not show any entries (blank) it means that no previous extracts were created. At least one full extract needs to be generated. This is needed to initialise a new offline openIMIS installation. To download the actual extracts, the operator needs to select the desired extract sequence from the list of available extracts. Four different types of extracts could be downloaded by clicking one of the following buttons:
After clicking the desired extract download button, the file download dialog box appears to select the destination folder for the extract file as shown below: |
Img. 228 Image 189
In case the extract file is not available (anymore) on the server, the following dialog box might appear: |
...
The reason for this box to appear could be that the file to be downloaded has been removed from the server or that you have attempted the download a full extract but no full extract was generated (only the differential extracts exist). It is also possible that you have attempted to download a photo extract but no photos were added since the last extract. Checking the checkbox |
Img. 230 Image 191
In case the extract is created in the background, the following dialog box appears: |
...
D - Upload Claims section
E - Upload Enrolment section
F - Upload Feedback section
G - Button section The H - Information panel The Information Panel is used to display messages back to the user. Messages will occur once an action has completed or if there was an error at any time during the process of these actions. IMIS Extracts (OFFLINE MODE)Offline HF |
...
A - Import Extract Used to extract photos obtained from online IMIS B - Import Photos Used to upload photos obtained from online IMIS C - Download Claim XMLs Used to download claims made in the offline health facility prior to be sent to online IMIS Offline Insurer |
...
A - Import Extract Used to upload extract obtained from online IMIS B - Import Photos Used to upload photos obtained from online IMIS C - Import Extract The Choose file section should be clicked to select an extract file to upload/import. The following file selector appears for Internet explorer (the appearance might differ for different internet browsers): |
...
On clicking the |
...
With the import/upload of an extract it is important to understand that each extract has its sequence number. This sequence number is found in the filename of the extract. We would in case of differential imports/uploads have to follow the sequence. In the example screen above, it shows in the status bar, that the last import was number 6. Therefore we should select in this case the differential extract number 7 as highlighted in the file selection dialog. Alternatively the operator could select any full extract with a sequence number higher than 6. In case a wrong extract is selected, warning messages will appear as shown below: |
Img. 236 Image 197
...
In case you are missing extract sequences, additional extracts are needed to be uploaded before the extract selected. The extract selected, in this case, does not directly follow the last sequence as indicated in the status bar of the screen. The additional extracts are to be provided by NSHIP district office. In case the extract file selected is valid, the system will import the data. New data will be added and existing data might be modified. After a successful import of an extract (Differential and FULL), a form is displayed with the statistics of the import as shown below: |
...
The above statistics are provided to give some quick overview of how many records were inserted or updated during the import process. In case we would for example update the phone number of an enrolment officer, it would result in one update and one insert as we always keep historical records. The photos inserts and updates are related to information on the photos, but are not the actual photographs. The actual photographs (\*.jpg) are uploaded separately. D - Import Photos The import of photos is optional and will have no further checking on sequence numbers. NSHIP should provide (if available) with each extract the photo extract as well. E.g. (for Differential extract) |
...
OR (for FULL extract) |
...
The photo extract will contain all photographs associated with the actual extract in a zipped format. The Upload procedure will simply unzip the extract and copy the image files to the photo folder of IMIS. After successful upload of the photographs the following message appears: |
...
E - Button panel The ‘Cancel’ button brings the operator back to the main page of IMIS. F - Information panel The Information Panel is used to display messages back to the user. Messages will occur once an action has completed or if there was an error at any time during the process of these actions. If the user opens the openIMIS extracts page (in offline mode only), the status bar will show the last sequence number uploaded. |
...
Prevnextnav macro |
---|
...
This page in other languages:
Excerpt | ||
---|---|---|
| ||
...